How to Change DNS Settings on Windows 10

If your internet isn’t working on your Windows 10 computer, it might be because of a DNS error. Luckily, it’s easy to change your DNS settings on Windows 10. Here’s how:

If you’re looking to change your DNS settings on Windows 10, there are a few different ways to do it. You can do it through the Settings app, the Control Panel, and the Command Prompt. In this article, we’ll show you how to change DNS settings on Windows 10 using all three methods.

First, let’s take a look at how to change DNS settings using the Settings app. To do this, open the Settings app and go to the “Network & Internet” section. In the “Network & Internet” section, click on the “Change adapter options” link.

In the “Change adapter options” window, find the network adapter that you want to change the DNS settings for and right-click on it. In the context menu that appears, click on the “Properties” option.

In the “Properties” window, select the “Internet Protocol Version 4 (TCP/IPv4)” option and click on the “Properties” button.

In the “Internet Protocol Version 4 (TCP/IPv4) Properties” window, select the “Use the following DNS server addresses” option. In the “Preferred DNS server” field, enter the DNS server that you want to use. In the “Alternate DNS server” field, you can enter a secondary DNS server.

Click on the “OK” button to save the changes.

If you want to change DNS settings using the Control Panel, open the Control Panel and go to the “Network and Sharing Center” section. In the “Network and Sharing Center” section, click on the “Change adapter settings” link.

In the “Change adapter settings” window, find the network adapter that you want to change the DNS settings for and right-click on it. In the context menu that appears, click on the “Properties” option.

In the “Properties” window, select the “Internet Protocol Version 4 (TCP/IPv4)” option and click on the “Properties” button.

In the “Internet Protocol Version 4 (TCP/IPv4) Properties” window, select the “Use the following DNS server addresses” option. In the “Preferred DNS server” field, enter the DNS server that you want to use. In the “Alternate DNS server” field, you can enter a secondary DNS server.

Click on the “OK” button to save the changes.

The last way that you can change DNS settings on Windows 10 is by using the Command Prompt. To do this, open the Command Prompt and run the following command:

netsh interface ipv4 set dnsserver “network adapter name” static DNS_server_address

Replace “network adapter name” with the name of the network adapter that you want to change the DNS settings for. Replace “DNS_server_address” with the DNS server that you want to use.

That’s all there is to it! These are the three different ways that you can change DNS settings on Windows 10.

The Domain Name System (DNS)

The Domain Name System (DNS) is a critical component of the internet that allows users to access websites using easy-to-remember domain names, instead of difficult-to-remember IP addresses.

When you type a domain name into your web browser, your computer contacts a DNS server to look up the IP address associated with that domain name. DNS servers are essentially the phone book of the internet, and they are distributed around the world to ensure that everyone can access the websites they need.

READ  How to rename files and folders in Windows 1110

If you’re having trouble accessing a website, one of the first things you can do is check your DNS settings to make sure that your computer is using the correct DNS server. In this article, we’ll show you how to change DNS settings on Windows 10.

To change your DNS settings on Windows 10, you’ll need to go to the “Network and Sharing Center” in the Control Panel. To get there, you can either search for “Network and Sharing Center” in the Start menu, or you can go to Control Panel \ All Control Panel Items \ Network and Sharing Center.

Once you’re in the Network and Sharing Center, click on the “Change adapter settings” link on the left-hand side.

This will open the Network Connections window, where you’ll see all of the network adapters on your computer. For most people, there will only be one adapter, but if you have multiple adapters (for example, if you’re using a wired and wireless connection), you’ll need to change the DNS settings on all of them.

To change the DNS settings for an adapter, double-click on it to open its properties window.

On the “General” tab, click on the “Internet Protocol Version 4 (TCP/IPv4)” item to select it. Then, click on the “Properties” button.

This will open the “Internet Protocol Version 4 (TCP/IPv4) Properties” window. Here, you can specify the DNS servers that you want to use.

There are two options for specifying DNS servers: “Automatic” and “Manual”. If you choose the “Automatic” option, your computer will automatically detect the DNS servers to use. This is the recommended option for most users.

If you choose the “Manual” option, you’ll need to specify the DNS servers to use. You can use any DNS servers that you like, but we recommend using the public DNS servers from Google or Cloudflare.

To use the Google DNS servers, enter “8.8.8.8” for the “Preferred DNS server” and “8.8.4.4” for the “Alternate DNS server”.

To use the Cloudflare DNS servers, enter “1.1.1.1” for the “Preferred DNS server” and “1.0.0.1” for the “Alternate DNS server”.

Once you’ve entered the DNS servers that you want to use, click on the “OK” button to save your changes.

If you’re still having trouble accessing a website after changing your DNS settings, you can try using a different DNS server. There are many public DNS servers available, and you can find a list of them here: https://www.lifewire.com/public-dns-servers-4688330

Configuring DNS Settings on Windows 10

Configuring DNS settings on Windows 10 is a relatively simple process that can be completed in just a few steps. The first thing you’ll need to do is open the Network and Sharing Center. To do this, simply search for “Network and Sharing Center” in the Start Menu.

Once you’re in the Network and Sharing Center, click on the “Change adapter settings” link on the left-hand side.

You should now see a list of all the network adapters on your computer. Find the one that is currently connected to the internet and right-click on it. Select “Properties” from the context menu.

In the Properties window, select the “Internet Protocol Version 4 (TCP/IPv4)” option and click on the “Properties” button.

In the next window, you’ll be able to enter the DNS settings that you want to use. If you want to use Google DNS, you can simply enter the following addresses:

8.8.8.8
8.8.4.4

If you want to use a different DNS service, simply enter the addresses of those servers instead.

Once you’re done, click on the “OK” button to save your changes. You should now be able to use the internet with the DNS settings that you configured.

READ  What business is a B2B?

How to Change DNS Settings Using the Command Prompt

Assuming that you are already familiar with what DNS is and does, we will now proceed to show you how to change DNS settings on Windows 10 using the Command Prompt.

First, open the Command Prompt by pressing the Windows logo key + X on your keyboard and then selecting “Command Prompt (Admin)” from the menu that appears.

Next, type the following command and press Enter:

netsh interface ipv4 set dns “Local Area Connection” static 192.168.0.1

Replace “Local Area Connection” with the name of the network connection that you want to change the DNS settings for. Also, replace “192.168.0.1” with the IP address of the DNS server that you want to use.

If you want to use multiple DNS servers, you can specify up to four DNS servers by using the following command:

netsh interface ipv4 set dns “Local Area Connection” static 192.168.0.1 primary

netsh interface ipv4 add dns “Local Area Connection” 192.168.0.2

Replace “Local Area Connection” with the name of the network connection that you want to change the DNS settings for. Also, replace “192.168.0.1” and “192.168.0.2” with the IP addresses of the DNS servers that you want to use.

If you want to use DNS servers from different providers, you can use the following command:

netsh interface ipv4 set dns “Local Area Connection” provider=”Provider Name”

Replace “Local Area Connection” with the name of the network connection that you want to change the DNS settings for. Also, replace “Provider Name” with the name of the DNS provider that you want to use.

If you want to use the DNS server of your ISP (Internet Service Provider), you can use the following command:

netsh interface ipv4 set dns “Local Area Connection” dhcp

Replace “Local Area Connection” with the name of the network connection that you want to change the DNS settings for.

If you want to use the DNS servers of Google, you can use the following command:

netsh interface ipv4 set dns “Local Area Connection” static 8.8.8.8 primary

netsh interface ipv4 add dns “Local Area Connection” 8.8.4.4

Replace “Local Area Connection” with the name of the network connection that you want to change the DNS settings for.

If you want to use the DNS servers of OpenDNS, you can use the following command:

netsh interface ipv4 set dns “Local Area Connection” static 208.67.222.222 primary

netsh interface ipv4 add dns “Local Area Connection” 208.67.220.220

Replace “Local Area Connection” with the name of the network connection that you want to change the DNS settings for.

After you have changed the DNS settings, you can check the current DNS settings by using the following command:

netsh interface ipv4 show dns “Local Area Connection”

Replace “Local Area Connection” with the name of the network connection that you want to check the DNS settings for.

How to Change DNS Settings Using the Control Panel

If you want to change your DNS settings on Windows 10, you can do so using the Control Panel. Here’s how:

1. Open the Control Panel.

2. Click on Network and Internet.

3. Click on Change adapter settings.

4. Right-click on the network adapter that you want to change the DNS settings for and select Properties.

5. Select Internet Protocol Version 4 (TCP/IPv4) and click the Properties button.

6. Click on the radio button next to Use the following DNS server addresses.

7. Enter the DNS server address that you want to use in the Preferred DNS server field.

READ  What did the Luddites believe?

8. Enter the DNS server address that you want to use in the Alternate DNS server field.

9. Click the OK button.

10. Click the Close button.

How to Change DNS Settings Using PowerShell

DNS, or the Domain Name System, is what allows us to connect to websites and devices using easy-to-remember names instead of difficult-to-remember IP addresses. Your DNS settings are stored in your computer’s network settings, and you can change them at any time.

If you’re not happy with the DNS settings assigned to you by your ISP, or if you want to use a different DNS service for some other reason, you can change your DNS settings using PowerShell.

To change your DNS settings using PowerShell, you’ll need to open a PowerShell window with administrative privileges. To do this, press the Windows key, type “PowerShell,” and then press Enter.

When the PowerShell window opens, type the following command:

Set-DnsClientServerAddress -InterfaceAlias “Ethernet” -ServerAddresses “8.8.8.8”

This command will change the DNS settings for the Ethernet connection to use the DNS servers at 8.8.8.8. You can change “Ethernet” to the name of any other connection you want to change the DNS settings for.

If you want to use multiple DNS servers, you can specify them all in the command, like this:

Set-DnsClientServerAddress -InterfaceAlias “Ethernet” -ServerAddresses “8.8.8.8”,”8.8.4.4″

Once you’ve run the command, your DNS settings will be updated and you’ll be able to use the new DNS servers.

How to Change DNS Settings Using the Registry Editor

When you want to change your DNS settings in Windows 10, you can do so using the Registry Editor. This tool lets you edit the registry, which is the database that stores all of Windows’ settings.

To open the Registry Editor, press the Windows key + R, type “regedit” into the Run dialog, and press Enter.

In the Registry Editor, navigate to the following key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

On the left-hand side, you should see a list of values. Double-click on the “DhcpNameServer” value to open it.

In the “DhcpNameServer” value, delete the existing DNS server IP addresses and type in the IP addresses of the DNS servers that you want to use. Be sure to separate each IP address with a comma.

When you’re finished, click OK.

You can now close the Registry Editor. Your DNS settings will be updated the next time you restart your computer.

Conclusion

If you want to change your DNS settings on Windows 10, you can do so using the Settings app. Simply open the app and go to the “Network & Internet” section. From there, select “Change adapter options” and then double-click on the network connection you want to modify.

Once you’re in the connection’s properties window, go to the “Networking” tab and scroll down to the “Internet Protocol Version 4 (TCP/IPv4)” entry. Select it and then click on the “Properties” button.

In the next window, you can either enter the DNS addresses manually or select the “Obtain DNS server address automatically” option. If you choose the latter, Windows will automatically detect and use the DNS servers provided by your ISP.

Once you’re done, simply click on the “OK” button to save your changes.

How to Change DNS Settings on Windows 10

Leave a Comment